Add to Favorites
Share

DSP-6KQ Built-in DSP 4CH 6000W Digital Power Sound Amplifier for Speaker Management System

  • Description
Product Detail

    DSP-6KQ Built-in DSP 4CH 6000W Digital Power Sound Amplifier for Speaker Management System


    Description 


    The DSP-6KQ is the DSP version of FP6000Q , it seamlessly integrates networked digital signal distribution, drive processing, power amplification, and load verification plus performance monitoring in a single hardware unit with unified software controller. Power affords significant benefits when compared to conventional approaches utilizing separate components. 


    Features


    1. 1500 W per channel @ 2 ohms

    2. 1250 W per channel @ 4 ohms

    3. 2U chassis weighing only 13kg

    4. Class TD output stage

    5. Regulated Switch Mode Power Supply 

    6. Full suite of protection and fault monitoring features


    Specification

    MODEL: DSP-6KQ
    Input: 4 channel
    Output: 4 channel
    PC Com Port: 1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45)
    Processor: 48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter
    Dynamic range: >110dB
    Frequency Response: ±0.25dB, 20Hz --- 20KHz
    Distortion: < 0.01%, 20Hz - 20KHz @ +10dBu balanced input
    Signal to noise ratio: >110dB
    crossover filter: Each output channel can be independently set as LPF and HPF, The parameters can be adjusted, Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 dB/octave
    EQ: Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB
    Delay: 0ms to 115ms
    Display:  2 x 20 LCD
    Store Settings: 20 user program dynamic storage
    Output Power
    8O Stereo Power 4×625W
    4O Stereo Power 4×1250W         
    2O Stereo Power 4×1500W        
    8O Bridged Monon Power 2×2500W         
    4O Bridged Monon Power 2×3000W     
    Frequenty Response 20Hz-20kHz ±0.5dB
    THD+N(Rated power,4O/KHz)% 0.10%
    Signal Noise Ration(dB) 110dB
    Input Impedance 20KO Balanced / 10kO Unbalanced
    Output Connectors Speakon Connectors(NEUTRIK)
    Power Requirement 100-120V-50-60Hz or 200-240V-50-60Hz
    Net weight 13kg
    Airframe 483×377×88mm

    3-1.jpg


    PC Interface

    3-2.jpg

    Should you're looking for dsp-6kq built-in dsp 4ch 6000w digital power sound amplifier for speaker management system, welcome to buy with us. We are one of the leading such manufacturers and suppliers in China. We can guarantee you the high quality and good performance of the appliance. Check the price list and quotation with our factory now.

Send your message to this supplier
To:  

Sanway Professional Audio Equipment Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  

  
Not exactly what you want? One request, multiple quotations Get Quotations Now >>